STEEL BUILDINGS WALL SHEETING Installation (Con't.)

STEP 1

Identifying the steel building wall panels, the proper seam lap, and the proper screw placement when fastening the sheets to the metal building.

DISCLAIMER FOR ARCHITECTURAL (Metal Building) PANEL

The architectural metal buildings style panel will occasionally reflect a wavy appearance. This is referred to in the industry as "oil canning" and this condition can magnify when panels are placed over blanket insulation. Oil canning is a characteristic of a flat surfaced panel and can be found throughout the metal buildings industry. Therefore, when ordering an architectural panel, you must realize this may or may not occur and is not a steel building manufacturing error. It appears more pronounced in darker colors. The waviness will be warranted as far as certification and integrity. However, panels will not be warranted for oil canning and/or appearance.

NOTE: Steel Building Wall sheeting does not require role caulking (mastic sealant) and is NOT supplied for wall sheeting.

<-- previous page                                     next page -->